Welcome to the Jet Ski Club. Check in for Social Rides or post your own to meet new friends!
Carpark86.jpg
Paradise Point - Cook Island - Chinderra.png
IMG_0798.PNG
Jolly Roger Sponsors.png
800w JSTV on black 2A7FFF 30.png
Rebel.png
Livin-Logo-Red-1.jpg
BeachBar.jpg
DSC07240.jpg
 
           

Author Topic: Jet Ski Information Seadoo Seat Strap reinstall  (Read 4689 times)

Offline kdog

Jet Ski Information Seadoo Seat Strap reinstall
« on: December 13, 2017, 07:43:43 AM »
Hi all, I thought I'd share my 2010 Seadoo's 130 GTI Seat Strap repair process.

After many faithful years of service the seat strap's rivet fatigued (seadoo part# 293150067) and sheared off during a clean of my ski.

Turns out that these are not your average rivet, and had to purchase the part from a Seadoo/Cam-Am dealer in Logan, who was very helpful.

Required tools/parts:
- 1x Rivet #293150067 (may also need 1x Grommet #293720067)
- Large Rivet gun to suit above rivet (aprox 6.35mm)
- Drill (with 2.5mm and 3.5mm bits)
- Small flatblade Screwdriver, and needle nose Pliers (for staple removal)
- Thin metal/wooden shim (aprox 2mm, prevents drilling into the seat :))
- Upholstery Staple gun (ideal, but not necessary, I didn't have one so I reused the staples and hammered them back in :))

Procedure:
* Remove the seat staples around the strap to access the back.
* Insert the shim between the back of the rivet and under the foam padding.
* Drill a small pilot hole into the rivet (2.5mm), and then carefully drill out the rivet.  Then remove the rivet, and cleanup and loose filings in the seat.
* I didn't need to but it's worth the time to inspect the grommet and replace if necessary (Grommet crown faces the engine bay).
* Restaple (hammer in staples)
* ReRivet the strap back into place

And that's it, let me know if you have any questions, or need any further info.

Cheers
« Last Edit: December 13, 2017, 07:44:36 AM by kdog »

Online Mandy

  • Woo Hoo
  • Member
  • *****
  • Posts: 3732
  • Total likes: 141
  • Fun First!
    • Jet Ski TV
  • I Ride a: I'll ride anything that starts :)
  • My hometown waterway is: Gold Coast, Australia
Re: Seadoo Seat Strap reinstall
« Reply #1 on: December 13, 2017, 11:00:45 AM »
Wow, great write up mate. Such a huge job for a strap eh  chr clp
See you on the water for some FUN!
mandy@jetskitv.tv
Ph: +61 449 077 747
JSX18P 


Offline kdog

Re: Seadoo Seat Strap reinstall
« Reply #2 on: December 13, 2017, 02:53:15 PM »
Thanks Mandy for the kind words :)  Haha and you're not wrong!


 


 

Trending Topics

Happy 10th Birthday Jet Ski Club! by Dirk
[September 17, 2018, 06:07:44 PM]


AJSA “Livin” Pirate Ride – Sunday 7th October 2018 by Mandy
[September 09, 2018, 11:56:56 AM]


Social ride around Straddie - Paradise Point Sat 18th Aug '18 at 8am by Mandy
[September 08, 2018, 05:52:02 PM]


2 banger session - 9am from Southport 11th aug '18 by Mandy
[September 07, 2018, 03:24:32 PM]


Paradise Point to Cook island, tweed river by DON B
[September 06, 2018, 08:29:26 PM]


AJSA 2018 AGM Notification by Mandy
[September 06, 2018, 04:07:22 PM]


Welcome to Spring! - Sat 1st Sept '18 by Mandy
[September 02, 2018, 10:14:15 AM]


New Members - Introduce yourselves and your Jet Ski here! by akad99
[August 30, 2018, 01:17:15 PM]


Training: Ski First Aid 25 Aug 18 by Mandy
[August 29, 2018, 07:08:58 PM]


Jet ski loosing power by CamGti155
[August 28, 2018, 10:28:56 AM]


BbTALKIN USA - Intercom headsets for Jet Skis! by Nigel
[August 26, 2018, 07:00:22 PM]


RIP Jet Ski Buddy! by johno
[August 25, 2018, 09:03:42 AM]


Cook Island & Tweed River - Sunday 15th July '18 8.30am departure by Mandy
[August 22, 2018, 06:36:07 PM]


“Hot Water” is set to begin filming Sept. 24. 18. by Jet Ski Club
[August 20, 2018, 08:25:43 AM]


Moreton morning run by Mandy
[August 19, 2018, 04:18:45 PM]